Carbon Accounting

LSRS Starts January 1: What It Means for Your Base Year

November 19, 2026

LSRS Starts January 1: What It Means for Your Base Year

On January 1, 2027, the GHG Protocol's Land Sector and Removals Standard (LSRS) goes into effect. For food and beverage companies, it sets new rules for counting the emissions tied to the farms and land that grow your ingredients.

When the calculation method changes between two years, you can no longer compare them apples-to-apples. If your base year was calculated under the old approach, it likely won't line up with the numbers you'll report under LSRS.

Below we cover what's changing under LSRS, why it's worth recalculating your base year, and how recalculating differs from formally restating it.

‍

What is LSRS?

LSRS is the first global standard for how companies account for greenhouse gas emissions and CO2 removals from land. The GHG Protocol released it in January 2026, after several years in draft as the Land Sector and Removals Guidance. Much of the final standard matches the draft that many companies have already been working from.

Few sectors are affected more than food and agriculture. Most of a food company's footprint sits in its supply chain, and much of that comes from land conversion, fertilizer, livestock and soil. Until now, the rules for counting those emissions left companies a lot of room for interpretation. LSRS aims to close that gap so companies measure consistently.

With the effective date early next year, the priority now is understanding what the new standard does to numbers you've already reported, and how to keep tracking progress toward your targets through the change.

What changes in your numbers

Most of the accounting categories in LSRS carried over from the draft, but few changes are worth knowing because they can alter your totals.

One method for statistical land use change

The draft allowed four ways to calculate statistical land use change (sLUC), the regional averages most companies rely on. The final standard requires a single method. More recent land clearing counts more heavily than older clearing, and the emissions are assigned to the crops whose growing area expanded onto that land (known as linear time discounting and product expansion allocation). One method means no more competing sLUC values, and results that compare better across companies.

Land carbon leakage for high-risk activities

If you use agricultural products for non-food, non-feed purposes like biofuel, or change practices in a way that significantly reduces yields, you'll now need to report the land conversion that could happen elsewhere to make up for that lost production. Leakage is reported as an additional metric outside your GHG inventory, with some exceptions. A sugar mill powered by bagasse, a byproduct of sugar making, for example, doesn't displace farmland.

Removals require measurement, then modeling

Reporting removals is optional, but to claim them you need to directly measure carbon stocks in year one, model them in years two through four, and then measure again in year five to check the accuracy of the model. If the measurements and the model don't line up, you'll need to correct earlier figures.

Forestry is excluded, for now

Forestry and non-productive lands were left out of the final standard because the working group couldn't reach consensus. If you account for wood or paper, which mostly applies to packaging, disclose the method you use and expect to update it once forestry guidance is released.

Land impacts extend to Scope 2. 

Electricity from bioenergy and large-scale hydropower now carries land-related impacts.

Taken together, these changes mean a footprint calculated under the old approach and one calculated under LSRS aren't measuring the same thing in the same way. That's where recalculating your base year comes in.

‍

Why recalculate your base year?

Recalculating your base year re-runs past emissions with today's methodology, whether the change comes from a new standard like LSRS or from better data of your own. You aren't necessarily required to do it, but skipping it leaves you comparing numbers calculated two different ways, so you lose any like-for-like comparison or clear insight into progress. A recalculation makes the comparison clear:

  • See your real progress: Recalculating takes methodology changes out of your year-over-year comparison. If your base year used the old method and this year uses LSRS, the gap between them reflects the method, not your performance. A recalculated base year puts both years on the same footing.
  • Capture reductions you're not getting credit for. On average, land use change and grid mix have improved since many companies set their base years. Without a recalculation, those gains get lost behind outdated emission factors. The same goes for sourcing shifts and supplier improvements an industry average couldn't capture.
  • Show changes in emissions intensity: Secondary databases apply flat emission factors. When a database is upgraded, it changes both your base year and your current year, so your intensity can't show improvement. A bottom-up recalculation using year-specific factors makes those intensity changes visible.
  • Know where to act next: HowGood’s recalculation breaks emissions down by driver (fuel, electricity, management practices) and by gas (CO₂, CH₄, N₂O), so you can prioritize the reduction initiatives with the most impact.
  • Track any target, public or internal: A like-for-like baseline matters whether your target is with SBTi or used internally to drive initiatives and funding.

Recalculate first, then decide whether to restate

Recalculating and formally restating your base year are two separate decisions, and you can make one without the other.

Recalculating is the technical step. It re-runs your base year with current methodology and the right year's emission factors, so you can compare it like-for-like with your current year under LSRS. You can use it internally to track and plan reductions, even if your public baseline never changes.

Formally restating is the public step. You declare a new baseline publicly: to SBTi, to investors, or in your sustainability report. A recalculation gives you the numbers to do this, but restating is your call.

Whether to restate depends on how much the recalculation moves your numbers. As Lizz Aspley, HowGood's Metrics Architect, explained in our LSRS webinar, most companies set a materiality threshold. For companies with SBTi targets, that threshold is 5%. Under SBTi's new Corporate Net-Zero Standard, it applies to each scope individually.

  • Below the threshold: you can keep your existing baseline and document the updated emission factors.
  • Above the threshold: you'll need to restate. That usually means your data has improved, and that's worth explaining clearly to leadership, investors and SBTi.
"Restating is a good thing. It means your data is getting better," said Arthur Gillett, HowGood's Chief Research Officer. "Let's get the true number, and then we can work from there."

Why now

Nothing needs to change for your 2026 reporting. Keep your current approach this year, and plan for LSRS to apply starting in 2027. That leaves time to recalculate before your first reporting cycle under the new standard.

LSRS also makes this a good moment to recalculate, and to restate if you need to. The new standard changes how the whole industry calculates emissions, so base year changes driven by LSRS are expected and much easier to explain.

Go deeper on base year recalculation

On December 8 at 10 AM ET, HowGood's Research team will host Base Year Recalculation: A Technical Deep Dive Ahead of LSRS. We'll walk through what changes under LSRS, what data you need to recalculate, and how to separate real reductions from changes in methodology. Most of the 45-minute session is set aside for open Q&A tailored to food and beverage teams, so bring your questions.

New to LSRS? Watch our March webinar with Lizz Aspley for a full walkthrough of the standard, or read our earlier breakdown of the Land Sector and Removals Guidance.

Register for the webinar